@article { author = {محمدی, سمیه}, title = {A review on the fabrication of Ti3C2Tx MXene and its application as a supercapacitor electrode}, journal = {Nano World}, volume = {17}, number = {64}, pages = {1-9}, year = {2021}, publisher = {}, issn = {2476-5945}, eissn = {2476-5945}, doi = {}, abstract = {In this review paper, we discuss about the synthesis of Ti3AlC2 precursor and the etching process to reach to the Ti3C2Tx layers and present different methods to delaminate the stacked nano-sheets. Early transition metal carbides or nitride nano-sheets (Generally called as MXenes) are one of the promising candidates for use in supercapacitor electrodes. These novel two-dimensional materials are attracted great attention due to their high surface area and charge storage capability with high density and velocity. The first introduced member of the MXene family is two-dimensional Titanium Carbide (Ti3C2Tx) which was presented by Naguib in 2011 at the Drexel University. This nano material has the highest electrical conductivity among the members of the MXene family and consequently, is more appealing to be used in battery and supercapacitor electrodes. Normally, Two-dimensional Titanium carbide is achieved by Aluminum etching from titanium-aluminum carbide precursor (Ti3AlC2) with the general name of MAXPhase by acidic etchants such as HF or LiF/HCl. Here, we discuss about the synthesis of Ti3AlC2 precursor and the etching process to reach to the Ti3C2Tx layers and present different methods to delaminate the stacked nano-sheets. We also present the methods to improve the quality of the MXene layers such as removing F ions from the surface and delaminating the layers by introduction of organic molecules on the surface. In addition, we talk about the utilization of these nano-sheets as the active material in supercapacitor electrodes and review the introduced methods for enhancing the electrochemical performance of them by adding convenient nanostructures.}, keywords = {MXene,Two-dimensional Titanium Carbide,MAX phase,Nano-sheet,Supercapacitor}, title_fa = {مروری بر سنتز نانوصفحات مکسین کربید تیتانیوم و بکارگیری آن در الکترود ابرخازن}, abstract_fa = {در این مقاله مروری، به نحوه سنتز پیش ماده و زدایش آن برای دستیابی به نانوصفحات کربید تیتانیوم، روش های جلوگیری از انباشتگی صفحات آن، بکارگیری این نانوصفحات در الکترود ابرخازن و روش‌های بهبود عملکرد آن با استفاده از اضافه کردن نانوساختارهای مناسب پرداخته شده است. از جمله مواد پیشنهادی برای ساخت الکترودهای ابرخازن، نانوصفحات متشکل از کاربید یا نیترید گروه‌های ابتدایی فلزات واسطه (تحت نام کلی مکسین‌) هستند. این مواد نوظهور دوبعدی به دلیل سطح موثر بالا و امکان ذخیره یون با چگالی و سرعت بالا مورد توجه قرار گرفته‌اند. اولین عضو سنتز شده از این خانواده، کربید تیتانیوم دو بعدی (Ti3C2Tx) است که در سال 2011 توسط ناگویب و همکارانش در دانشگاه درکسل معرفی شد. این ماده دارای بیشترین هدایت الکتریکی در بین اعضای خانواده مکسین است و در نتیجه، جذابیت بیشتری جهت بکارگیری در ساخت الکترود باتری و ابرخازن را داراست. کاربید تیتانیوم دوبعدی ، خود از زدایش آلومینیوم از پیش‌ماده کاربید تیتانیوم-آلومینیوم (Ti3AlC2)، (تحت نام کلی MAXPhase) با کمک زداینده‌هایی از جمله HF یا LiF/HCl بدست می‌آید. در ادامه، ابتدا به نحوه سنتز پیش ماده و زدایش آن برای دستیابی به نانوصفحات کربید تیتانیوم و روش های جلوگیری از انباشتگی صفحات آن می‌پردازیم و به روش‌های بهبود کیفیت لایه‌ از جمله حذف یون فلوئور و ایجاد فاصله بین صفحات با مولکول‌های ارگانیک اشاره می‌کنیم. همچنین، در مورد بکارگیری این نانوصفحات در الکترود ابرخازن و روش‌های بهبود عملکرد آن با استفاده از اضافه کردن نانوساختارهای مناسب صحبت خواهیم کرد.}, keywords_fa = {مکسین,کربید تیتانیوم دو بعدی,فاز مکس,نانو صفحه,ابرخازن}, url = {https://donyayenano.ir/article_248273.html}, eprint = {https://donyayenano.ir/article_248273_8a8d1a349d092b1ecfbe76ecab5fba2f.pdf} } @article { author = {شریعت, مهدی and مظفری مکی آبادی, رضا and کریمی پور, مسعود and ملایی, مهدی}, title = {Deposition of graphene oxide/gold nanocomposite using non-equilibrium plasma jet}, journal = {Nano World}, volume = {17}, number = {64}, pages = {10-17}, year = {2021}, publisher = {}, issn = {2476-5945}, eissn = {2476-5945}, doi = {}, abstract = { In this paper, a direct one-step deposition method through reduction by atmospheric pressure plasma jet was used to produce graphene oxide/gold (GO/Au) nanocomposites from HAuCl4 and graphene oxide suspension. Microdroplets of the solution were reduced to GO/Au nanocomposite in the plasma and printed on glass substrate.. The structure and morphology of the composites were characterized by FESEM, XRD, EDS and Raman spectroscopy. The FESEM images demonestrated that graphene oxide surfaces were decorated by Au nanoparticles. The XRD analysis showed that the formation of Au nanoparticles on the surface of GO nanosheets with the face centered cubic crystalline structure.The FESEM and XRD results revealed that increasing the plasma voltage leads to rising of the Au nanoparticles density on the GO surface. The EDS analysis showed that Au was uniformly distributed on GO surface via the plasma jet. The Raman spectrum of GO/Au contained G and D bands at 1355cm-1 and 1590cm-1, respectively, due to the GO sheets. }, keywords = {}, title_fa = {رسوب‏گذاری نانوکامپوزیت اکسید گرافن /طلا با کمک جت پلاسمای غیر تعادلی}, abstract_fa = {در این مقاله، نانوکامپوزیت‏های اکسید گرافن/طلا (GO/Au)، طی یک مرحله به صورت مستقیم با استفاده از جت پلاسمای غیر تعادلی در فشار اتمسفری تولید می‏شود. در این روش قطرات ریزی از محلول پیش‏ماده شامل کلرو آئوریک اسید (HAuCl4) و اکسید گرافن با ورود به پلاسما احیا شده و کامپوزیت GO/Au روی سطح زیرلایه رسوب‏گذاری می‏شود. ساختار بلوری و ریخت‏شناسی نانوکامپوزیت‏های رسوب شده با استفاده از تفرق پرتو ایکس(XRD)، میکروسکوپ الکترونی روبشی گسیل میدانی (FESEM)، طیف نگاری پراکندگی انرژی پرتو ایکس (EDS) و طیف سنجی رامان مورد بررسی قرار گرفت. نتایج XRD نشان داد نانوساختارهای طلا با ساختار بلوری مکعبی مرکز سطحی تولید شده‏اند. از این نتایج دریافت شد که با افزایش ولتاژ اعمالی پلاسما، تراکم بلورک‏ها طلا روی سطوح گرافنی افزایش می‏یابد. تصاویر FESEM تایید می‏کند که نانوذرات طلا روی سطوح اکسید گرافن تشکیل شده است. آنالیز EDS نشان داد که ذرات طلا روی سطوح اکسید گرافن با توزیع یکنواخت رسوب‏گذاری شده است. طیف رامان نانوکامپوزیت‏های رسوب شده روی زیرلایه شیشه دارای قله‏هایی در cm-11355 و cm-11590 است. این قله‏ها حضور اکسید گرفن را در کامپوزیت GO/Au تایید می‏کند.}, keywords_fa = {نانوکامپوزیت,نانوذرات طلا,اکسید گرافن,جت پلاسمای غیر تعادلی}, url = {https://donyayenano.ir/article_248275.html}, eprint = {https://donyayenano.ir/article_248275_cfa695a3a110c28a3705aa995ca4c2ad.pdf} } @article { author = {حسینی, زهرا}, title = {Photon Management in Dye Sensitized Solar Cell Using Photon Conversion Layer}, journal = {Nano World}, volume = {17}, number = {64}, pages = {18-27}, year = {2021}, publisher = {}, issn = {2476-5945}, eissn = {2476-5945}, doi = {}, abstract = {Incident photon conversion is an effective strategy to compensate the low absorption in dye sensitized solar cell (DSSC). Photon conversion strategy can be done using luminescent materials. The luminescent material should absorb photons in wavelength range which the DSSC has low external quantum efficiency, while it should emit photons in wavelength range which the DSSC has high external quantum efficiency. This strategy is more applicable to DSSC compared to other kinds of solar cell due to the vast variety of the dye molecules used in DSSC. In addition, the transparency of the DSSC provides the opportunity to apply the photon conversion layer in different architectures; inside or outside the DSSC. In this article, the photon conversion strategy and its requirements are discussed. Different DSSC structures with photon conversion layer and suitable luminescent materials are also introduced. The results show that the choice of the luminescent material for each structure is the most important parameter governing the performance of the DSSC with photon conversion layer}, keywords = {Dye sensitized Solar Cell,Photon Management,Photon Conversion,Quantum Dot,Luminescence}, title_fa = {مدیریت نور در سلول خورشیدی رنگدانه‌ای با استفاده از لایه جابجاکننده طول‌موج فوتون}, abstract_fa = {جابجا کردن طیف نور فرودی بر سلول خورشیدی رنگدانه‌ای راهکاری مؤثر برای جبران جذب ضعیف رنگدانه در برخی طول‌موج‌ها محسوب می‌شود. این کار با استفاده از مواد نورتاب با طیف جذبی مکمل طیف جذب جاذب نور در سلول خورشیدی انجام می‌شود. همچنین طیف تابش ماده نورتاب باید منطبق بر طول موج جذب سلول خورشیدی باشد. بدین منظور ماده نورتاب در خارج و یا داخل سلول خورشیدی و در ساختارهای مختلف مورد استفاده قرار می‌گیرد. در این مقاله این راهکار و ملزومات اجرای آن شرح داده شده است. به علاوه، ساختارهای ممکن مورد استفاده با این هدف به همراه گروه‌های مختلف مواد نورتاب معرفی شده است.}, keywords_fa = {سلول خورشیدی رنگدانه‌ای,مدیریت نور,جابجایی طول موج فوتون,نقاط کوانتومی,نورتابی}, url = {https://donyayenano.ir/article_248276.html}, eprint = {https://donyayenano.ir/article_248276_80aab3719a19c8c65b7ffa00fa4a486f.pdf} } @article { author = {کاکایی, سعید and ستارزاده خامنه, الهام}, title = {A review of the properties of magnetic nanoparticles for targeted diagnosis and drug delivery}, journal = {Nano World}, volume = {17}, number = {64}, pages = {28-35}, year = {2021}, publisher = {}, issn = {2476-5945}, eissn = {2476-5945}, doi = {}, abstract = {In recent years, the nanotechnology has been extensively studied in medicine and pharmacy. For this purpose, this technology has been used in the development of new imaging technology for early detection and more efficient treatment of diseases such as cancer, magnetic fluids, catalysts, biotechnology/biomedicine, magnetic resonance imaging, information storage, etc. Magnetic nanoparticles are often utilized in the planning of targeted drug delivery systems due to the possibility of their device using an external magnetic field. In current years, nanotechnology has been considerably studied in remedy and pharmacy. To this end, this generation has been used with inside the improvement of the latest imaging generation for early detection and extra green remedy of sicknesses inclusive of cancer, magnetic fluids, catalysts, biotechnology/biomedicine, magnetic resonance imaging, data storage, thus, these substances enter the bloodstream as therapeutic or diagnostic agents and are concentrated in the target tissue using an external magnet, reducing the dose of the drug, not systemically distributing the drug within the body, and therefore reducing the incidence of side effects.}, keywords = {Magnetic nanoparticles,Hyperthermia,Magnetic resonance imaging,targeted drug delivery}, title_fa = {مروری برخواص نانو ذرات مغناطیسی جهت تشخیص و دارورسانی هدفمند}, abstract_fa = {در سال‌های اخیر، فناوری نانو به صورت گسترده‌ای در پزشکی و داروسازی مورد مطالعه و بررسی قرار گرفته است. بدین منظور، این فناوری در توسعه تکنولوژی نوین تصویربرداری جهت تشخیص زود هنگام و درمان کارآمدتر بیماری‌هایی مانند سرطان، سیالهای مغناطیسی، کاتالیزور، زیست فناوری/زیست پزشکی، تصویر برداری رزونانس مغناطیسی، ذخیره اطلاعات و ..... به کار گرفته می‌شوند. نانوذرات مغناطیسی با توجه به اینکه امکان کنترل از راه دورآنها با استفاده از به کارگیری یک میدان مغناطیسی خارجی امکان‌پذیر می‌باشد، می‌توانند در طراحی سیستم‌های دارورسانی هدفمند مورد استفاده قرار گیرند. بنابراین اتصال حامل به عامل درمانی در طول عمل درمان به یکی از روش های مناسب جهت درمان تومورهای سرطانی می‌باشد. از این رو استفاده از رادیونوکلئیدها به عنوان عامل درمانی که می توانند بدون جدا شدن از حامل مغناطیسی و با تابش‌های ساطع شده توسط رادیونوکلئیدها، سلول های سرطانی را تخریب کنند، به عنوان یک روش مطلوب مورد توجه قرار گرفته است. بدین ترتیب این مواد به عنوان عوامل درمانی و یا تشخیصی وارد جریان خون شده و با استفاده از یک آهنربای خارجی در بافت هدف متمرکز می‌شود و باعث کاهش دز مصرفی دارو، عدم توزیع سیستمیک دارو در بدن و در نتیجه کاهش بروز عوارض جانبی می‌شود.}, keywords_fa = {نانوذرات مغناطیسی,هایپرترمیا,تصویربرداری رزونانس مغناطیسی,دارورسانی هدفمند}, url = {https://donyayenano.ir/article_248277.html}, eprint = {https://donyayenano.ir/article_248277_060744114ad72e2d9d0244a46005f959.pdf} } @article { author = {فکری, محمدحسین and رضوی مهر, مریم}, title = {Theoretical study of the effect of Si impurities on the electronic and thermodynamic properties of C76 nanofullerin in different solvents}, journal = {Nano World}, volume = {17}, number = {64}, pages = {36-41}, year = {2021}, publisher = {}, issn = {2476-5945}, eissn = {2476-5945}, doi = {}, abstract = {Doping or contaminating molecules, especially nanotubes and fullerenes, improves many of their electronic and thermodynamic properties. In this study, C76 nanofullerene was considered that less studied and a-Si atom replaced a carbon atom. The structure of the C76 nano-fullerene and C75Si cluster was designed and optimized using Spartan and Gaussian software. Using Gaussian outputs, quantum descriptors of two molecules such as HOMO and LUMO energy, energy gap, bipolar moment, chemical potential, chemical hardness, electrophilicity, maximum charge transfer, and other parameters were calculated and some of their properties were compared. In the present study, the continuous polar model (PCM) was used to describe the thermodynamic properties of these molecules in different solvents including toluene, ethanol, dichloromethane, dimethyl sulfoxide, and cyclohexane. The results show that the impurity increases the dipole moment, electrophilicity, and maximum charge transfer and reduces the energy gap, and chemical hardness of fullerene C76, which means that the reactivity and solubility of fullerene by dopping.}, keywords = {Spartan 10,Gaussian 09,Fullen C76,Dopping,Chemical potential,Thermodynamic functions}, title_fa = {مطالعه‌ی نظری تاثیر ناخالصی Si بر خواص الکترونی و ترمودینامیکی نانو فولرن C76 در حلال-های مختلف}, abstract_fa = {داپینگ یا آلوده کردن مولکول‌ها بالاخص نانو لوله‌ها و فولرن‌ها باعث بهبود بسیاری از خواص الکترونی و ترمودینامیکی آنها می-شود. در این تحقیق، نانو فولرن C76 که کمتر مورد مطالعه قرار گرفته است، در نظر گرفته شد و یک اتم Si جایگزین یک اتم کربن شد. با استفاده از نرم‌افزارهای اسپارتان و گوسین ساختار نانو فولرن C76 و کلاستر C75Si طراحی و بهینه شد. به کمک خروجی‌های گوسین توصیفگرهای کوانتومی دو مولکول مانند انرژی هومو و لومو، گاف انرژی، ممان دوقطبی، پتانسیل شیمیایی، سختی شیمیایی، الکتروفیلیسیتی، ماکزیمم انتقال بار و سایر پارمترها محاسبه گردید و برخی خواص آنها با هم مقایسه شد. در پژوهش حاضر، از مدل پیوسته قطبی (PCM) برای توصیف خواص ترمودینامیکی این دو مولکول در حلال‌های مختلف شامل تولوئن، اتانول، دی‌کلرومتان، دی‌اتیل سولفوکسید و سیکلوهگزان استفاده شد. نتایج نشان می‌دهد ناخالصی باعث افزایش ممان دوقطبی، الکتروفیلیسیتی و ماکزیمم انتقال بار و کاهش گاف انرژی و سختی شیمیایی فولرن C76 می‌گردد که این به معنی افزایش واکنش‌پذیری و حلالیت فولرن توسط داپینگ است.}, keywords_fa = {اسپارتان 10,گوسین 09,فولرن C76,داپینگ,پتانسیل شیمیایی,توابع ترمودینامیکی}, url = {https://donyayenano.ir/article_248278.html}, eprint = {https://donyayenano.ir/article_248278_b05f2f3fa77ce115f3c77dfb85e22cc4.pdf} } @article { author = {Ahmadpour, Hossein and Kalantari, Maryam and Soltani, Ataollah and Moradi, Ali}, title = {Investigation of effect of silica nanoparticles and zinc phosphate pigment on thermal and anticorrosion properties of the epoxy nanocomposite coatings}, journal = {Nano World}, volume = {17}, number = {64}, pages = {42-52}, year = {2021}, publisher = {}, issn = {2476-5945}, eissn = {2476-5945}, doi = {}, abstract = {Coating the surface of metal pipes is one of the solutions to protect pipelines against various types of corrosion. Adding inorganic nanoparticles to epoxy resin can improve the mechanical and chemical resistance of the coating. The purpose of this study is synthesis of epoxy and characterization of anticorrosion and thermal resistance. To accomplish this aim, epoxy nanocomposite were synthesized from nanosilica, Epiran 5s along with 3 different hardeners. The surface of silica nano particles was modified with trimethoxy methyl silane before using. Anti-corrosion properties were evaluated by Plunging tests, the results of this test indicated the superiority of the anti-corrosion properties of the coating containing phthalic anhydride hardener compared to other coatings. Finally, according to the TGA curves obtained from experiments and using mathematical equations relationships, activation energy for the production each of the coatings obtained subsequent test results also show that the thermal properties of the coating hardener of phthalic anhydride is higher than the others. The results show that thermal stability nanocomposite coating containing phthalic anhydride hardener is improved by 47% after modification with silane.}, keywords = {Epoxy resin,Nano silica,Corrosion,Nanocomposite,Thermal Resistance,Phthalic anhydride hardner}, title_fa = {بررسی تاثیر نانو ذرات سیلیکا و رنگ‌دانه فسفات روی بر خواص حرارتی و ضد خوردگی پوشش های نانوکامپوزیتی اپوکسی}, abstract_fa = {پوشش دهی سطح لوله‌های فلزی ازجمله راهکار‌های محافظت از خطوط لوله در برابر انواع خوردگی است. افزودن نانو ذرات غیر آلی به رزین اپوکسی می‌تواند باعث بهبود مقاومت مکانیکی و شیمیایی پوشش شود. هدف از این تحقیق ساخت نانو کامپوزیت‌هایی بر پایه اپوکسی و بررسی خواص ضد خوردگی و مقاومت حرارتی آن‌ها است. برای دستیابی به این هدف نانو کامپوزیت اپوکسی، از نانو سیلیکا، رزین اپیرن S5 به همراه سه عامل پخت سنتز شد. سطح نانو ذرات سیلیکا با استفاده از تری‌متوکسی متیل سیلان اصلاح گردید. خواص ضد خوردگی توسط آزمون غوطه‌وری مورد بررسی قرار گرفت که نتایج این آزمون نشان‌دهنده برتری خواص ضد خوردگی پوشش حاوی سخت‌کننده‌ی فتالیک انیدرید نسبت به سایر پوشش‌ها بود. درنهایت، با توجه به منحنی TGA به‌دست‌آمده از آزمایش و با استفاده از روابط ریاضی، انرژی فعال‌سازی برای تولید هر یک از پوشش‌های به دست آمد که نتایج این آزمون نیز نشان‌دهنده‌ی برتری خواص حرارتی پوششی که از سخت‌کننده‌ی فتالیک انیدرید است. نتایج تحقیق نشان می‌دهد که پایداری حرارتی نانو کامپوزیت پوشش حاوی سخت‌کننده‌ی فتالیک انیدرید پس از اصلاح با سیلان بهبود 47 درصدی می‌یابد.}, keywords_fa = {نانوکامپوزیت,پوشش اپوکسی,نانو ذرات سیلیکا,خوردگی,مقاومت حرارتی,سخت کننده فتالیک انیدرید}, url = {https://donyayenano.ir/article_248279.html}, eprint = {https://donyayenano.ir/article_248279_82024d5502f3041d0c1a37f552a5a269.pdf} } @article { author = {Yousefi, romina and badiei, alireza}, title = {Stark (electron- absorption) spectroscopy and applications in nanomaterials characterization: A Review}, journal = {Nano World}, volume = {17}, number = {64}, pages = {53-60}, year = {2021}, publisher = {}, issn = {2476-5945}, eissn = {2476-5945}, doi = {}, abstract = {In the past few years, scientists are looking for new methods to characterize materials and identify their features in natural media without any separation. The electric field is one of the most important parameters which affects the structure and changes all systems, including electron movement. The electric field affects all processes and transitions in systems that include electric charge. Electron-absorption (Stark) spectroscopy is a method to obtain absorption spectra that are investigated in the presence and absence of an electric field. The electric field makes changes in samples' dipole moment. These changes give much information about how different components approach each other and react, the type of interactions, and how they affect one another. We can predict the occurred processes in the reaction media with this type of information and use them in intermolecular interaction modeling. These spectroscopy methods' most essential usages are in the characterization and identifying the properties of polymers, proteins, nanoparticles, quantum dots, and optical devices' design.}, keywords = {stark spectroscopy,Electric field,Polymers,nanoparticles,Quantum dots}, title_fa = {طیف سنجی استارک (جذبی-الکترونی) و کاربردهای آن در شناسایی نانومواد}, abstract_fa = {در سال‌های اخیر محققین در رشته های متعدد علوم برای شناسایی مواد و ویژگی‌های آن‌ها به دنبال به کارگیری روش‌های نوینی هستند که گونه‌ی مورد مطالعه بدون جدا شدن از محیط واکنش، در محیط واقعی بررسی شود. میدان الکتریکی یکی از مهمترین عوامل موثر بر ساختار و ایجاد تغییر بر روی مواد در محیط واقعی است. میدان الکتریکی در محیط مورد بررسی که شامل تمام فرآیند‌ها و انتقالات که شامل حرکت بار الکتریکی هستند، تاثیر‌گذار است. طیف سنجی جذبی-الکترونی (طیف سنجی استارک)، روشی است که در آن طیف جذبی گونه در حضور و عدم حضور میدان الکتریکی بررسی می‌شود. حضور میدان الکتریکی تغییراتی را در گشتاور دوقطبی ایجاد می‌کند، که در نحوه‌ی ارتباط، نزدیک شدن اجزا مختلف در محیط واکنش، نوع برهمکنش‌ها و نحوه تاثیر آن‌ها بر یکدیگر، اطلاعات فراوانی را می‌دهد. با بررسی این اطلاعات می‌توان فرآیند های صورت گرفته در یک محیط طبیعی را پیش‌بینی نمود و همچنین از این روش برای مدل سازی واکنش های درون مولکولی نیز بهره جست. از کاربردهای مهم این روش طیف‌سنجی می توان به بررسی ویژگی‌های پلیمرها، پروتئین ها، نانوذرات و نقاط کوانتمی، و طراحی وسائل نوری اشاره کرد.}, keywords_fa = {طیف سنجی استارک,میدان الکتریکی,خطوط طیفی,نانوذرات,نقاط کوانتمی,پلیمر}, url = {https://donyayenano.ir/article_248280.html}, eprint = {https://donyayenano.ir/article_248280_2027e1bed27345bb6fb9e782059999a5.pdf} }